Tag: milta

Car Brakes Can Reach Up To 500 °C. MILTA Technology
Nov 05, 2017
Car Brakes Can Reach Up To 500 °C.

During normal driving, your brakes should not exceed the temperature of 200°C. However, if you accelerate and brake very intensively, like during a race, they can easily go up to as much as 500 °C or 1000 °F.

Continue Reading

How to identify a cloned car? MILTA Technology
Nov 04, 2017
How to identify a cloned car?

If you are going to buy a used car, you need to be careful not to buy the one that was stolen. Unfortunately, it is not enough to check the plate number at the police station. The stolen car could be cloned, which means that all the documents are copied from an identical car that […]

Continue Reading

Dragsters Consume Up to 5.5 Litres of Nitro Per Second. MILTA Technology
Nov 03, 2017
Dragsters Consume Up to 5.5 Litres of Nitro Per Second.

Dragsters achieve the same rate of fuel consumption as a fully loaded Boeing 747 but with four times the energy volume. That is why they accelerate faster than any other wheel powered vehicles ever created and reach as much as 10,000 Horsepower capacity.

Continue Reading

Air Conditioning service. MILTA Technology
Nov 02, 2017
Air Conditioning service.

When the summer will be back, and if you still haven’t managed to service your air conditioning, it is the high time to do so. Even if it seems to work well, it is still worth checking. Sometimes the leaks or damages are small enough to be unnoticeable, but if they are left without repairing, […]

Continue Reading

How to Handle a Car Accident? MILTA Technology
Nov 01, 2017
How to Handle a Car Accident?

If you are involved in a car accident, the first thing you need to do is to stop your car. It may sound obvious, yet not many people know that it is not only the best practice, but it is your obligation regulated by the Road Traffic Act. The next thing is to secure the […]

Continue Reading

Don’t touch the glass when changing the bulbs. MILTA Technology
Nov 01, 2017
Don’t touch the glass when changing the bulbs.

When you change a bulb in your car and you touch the glass part with your hand, you will most likely leave some dirt and oil residues on the glass. It may cause that part of the glass gets hotter than the other parts when your lights are on, causing stress inside the material. After […]

Continue Reading

Should you buy a remanufactured transmission? MILTA Technology
Nov 01, 2017
Should you buy a remanufactured transmission?

An automatic gearbox is an expensive component in a car due to its intricate internal structure. Over time, the gearbox in your car can suffer damage which may mean a replacement gearbox is necessary. Fortunately, by using a specialist, you can find a range of refurbished and remanufactured transmissions to fit in your car to […]

Continue Reading

Watch out when removing or installing the battery. MILTA Technology
Oct 31, 2017
Watch out when removing or installing the battery.

When connecting or disconnecting your battery, you need to be very careful not to drop the spanner or any other object, so it would connect the two terminals and cause an electrical short. Especially if you have a powerful battery, it could result in severe damage caused by the very high current passing from one […]

Continue Reading

V4 Stands for All 4 Cylinder Engines. MILTA Technology
Oct 30, 2017
V4 Stands for All 4 Cylinder Engines.

A four cylinder car could have different types of abbreviation depending on their configuration. Only limited amount of drivers can say that they own a V4 cylinder engine. Some of the V4 cars are Ford Essex, Ford Taunus, Lancia Fulvia, 1980 Saab 9-6, etc. However, other mostly will have I4 cylinder engine or inline four, […]

Continue Reading

Expect Traffic Jams to Minimise the Stress. MILTA Technology
Oct 29, 2017
Expect Traffic Jams to Minimise the Stress.

If you often drive in places where the traffic is high, and it gets your nerves, you should take some countermeasures to avoid too much stress. As you probably know, it is far better to avoid the stress altogether rather than just dealing with it when it appears. There are many ways to find a […]

Continue Reading